0
0
The K9 Toyota Tacoma Bed Rail Rack is the latest rack option from the legendary Eezi-Awn brand. It uses the same platforms as the K9 Roof Racks, but with a unique bed rail mounted leg designed specifically for Toyota’s under rail mounting channel. It saddles on the bed rail top surface, and attaches to the channel under the bed rail with 2 bolts per leg. It then attaches to the bottom cross braces on the K9 Platform, for a very stout rack solution over the bed of your truck.
Sizes
The K9 Bed Rail Rack for the Toyota Tacoma is a great size solution for both the 5’ and 6’ bed. The bed rail legs taper in on each side from the bed rail to give it a very sleek look. The length is within inches of the front and back of the bed. The rack is low enough to provide access to items in the bed, and still keep your equipment below cab high for great aerodynamics and low center of gravity. Perfect for adding a Roof Top Tent. With the tailgate locked, it also provides protection against theft of your equipment.
Capacity
Capacity of the K9 roof rack system is broken into two measurements, static weight and dynamic weight. Static is when the vehicle is stationary. Dynamic is when the vehicle is in motion. We have not tested the K9 racks on vehicles to the point of roof failure. We can tell you what we have tested ourselves effectively. A dynamic capacity in the range of 500 pounds is possible. That load included a RTT, awning, dual fuel can holder, aluminum storage case with recovery gear, shovel, axe, under mount table, light bar, etc on a 2.2M long rack. A static capacity of 1000 pounds is possible. An example of static load increase would be adding people in the tent on the roof. Please understand these capacities are on vehicles that have modified suspensions designed to manage this amount of weight. They are not a warrantied or guaranteed capacity. Your load capacity will vary.
No Drilling
The K9 Roof Rack System for the Tacoma Bed Rail requires no drilling at all for any size rack. Our proprietary Bed Rail Legs attach directly to the OEM under rail channel. All hardware included.
Installation
Installation of this rack system can be done by one person in approximately 1 hour. Help lifting the platform on the bed would be appreciated. You start by installing the Bed Rail Leg threaded plates into the under rail channel. Attach the Bed Rail Leg to the plates with the included hardware, leaving them loose for lateral adjustment. Lay platform on top of Bed Rail Legs, and locate legs under each corresponding cross brace. Attach legs to the platform with associated hardware, loose for the moment. Align rack where you prefer, front to back and side to side. Tighten legs to channel and to platform. All good to go.
System Components
The components used on the Tacoma bed rail rack systems include a set of K9 Bed Rail feet (2 per platform cross brace), and a platform.
System Accessories
The Eezi-Awn K9 Roof Rack System comes with a complete array of bolt on accessories. Jerry Can holders, Axe mounts, Shovel mounts, Hi-Lift Mounts, Max Trax Mounts, Awning Mounts, Under Rack Table mounts, and much more. Take a look at the accessories page to see all our options.
Features
- Fully Welded 1-3/8"H Low-Profile Platform
- Lightweight All Aluminum Construction
- All Components Are Anodized And Powder Coated Matte Black
- 5-1/8" Wide M8 T-Slot Slats, Running Front to Back
- Semi-Elliptical Bottom Cross Braces To Reduce Wind Noise
- M6 T-Slot Around Top Perimeter With Rounded Top Edge
- Full Complement of K9 Roof Rack Accessories For Top/Bottom/Side Mount
- Infinite Gear Organization Configurations
- Includes All Installation Components & Hardware
Specifications
- Platform: 5’ Bed - 1400mmW x 1400mmL (55”W x 55”L x 1.38”H)
- Platform: 6’ Bed - 1400mmW x 1600mmL (55”W x 62”L x 1.38”H)
- K9 Bed Rail Legs: 5’ Bed - 6 Legs, 6’ Bed - 8 Legs
- Height, Bed Rail to top of Platform: 6.5”
- Height, Bed Floor to bottom of Platform: 23.5”
- Height, Top of Platform to top of cab: 13”
Installation Instructions Downloads
- Installation Instructions
Order Confirmation:
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. We will capture the authorized payment when we place your order with the manufacturer. If your item is on back order or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. ITEMS ARE SHIPPED DIRECTLY FROM THE MANUFACTURER (or nearest distribution center) SO YOU GET YOUR ORDER AS QUICKLY AS POSSIBLE.
Order Shipment:
Please refer to the Shipping Lead Times section on this page for the current estimated shipping time. If your order is in stock and we process the charges to your credit card, it will ship within five (5) business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six (6) business days of your order, feel free to follow up with us at orders@RoofTopWanderer.com. We are here to help with all your Wandering needs.
Shipping Lead Times:
Many of the products that we offer have various lead times. Below are the current estimated lead times before shipping. Please note that these are subject to change and we will communicate any changes or delays. Cali Raised LED: 5-7 business days, rock sliders 8+ weeks Smittybilt: 1-5 business days (call for tents) ARB: 1-5 business days Roam: 1-3 business days Body Armor: 1-5 business days Roof Top Wanderer: 1-3 business days
For more information about shipping, click here.
Returns & Refunds:
Roof Top Wanderer honors all warranty and return policies of our product manufacturers. If your order has shipped, you (the buyer) will be responsible for actual return shipping charges, unless Roof Top Wanderer or the manufacturer made a mistake. Refunds will only be issued to the original credit card that you use when placing your order.
Purchases can be returned within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. A restocking fee may apply (up to 25% of the purchase price). After 30 days, non-warranty related returns are at the sole discretion of the manufacturer. A restocking fee may apply (up to 30% of the purchase price).
If you’d like to make a return or exchange, PLEASE EMAIL US FIRST at sales@rooftopwanderer.com for a RMA# (Return Merchandise Authorization number).
If the reason for return is not a result of a manufacturer's error, shipping costs (if any) incurred by Roof Top Wanderer will be deducted from your refund. We strongly urge you to repackage the products with care, use a reputable shipping company with tracking and insurance. Roof Top Wanderer or the product manufacturer cannot be held liable for lost returns. It generally takes 3 – 5 days after the package arrives at their warehouse for your return to be processed and credit to be issued to your card. As soon as the return is processed you’ll get an email confirmation.
Please print your RMA clearly on the shipping label. Thank you!
- You must purchase the item from our website before requesting your Price Match Guarantee.
- Promotions such as rebates and buy one, get one free offer are not eligible.
- The item must be in stock on the competitor's website.
- The competitor must be an online store, they may not have a retail location.
- The website can not be a discounter or auction website (ie; eBay, overstock, etc..).
- The competitor must be an Authorized Retailer of the product in question.
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax.
